Daikin BRC1E72 Manual Del Usuario página 13

2
On/Off
nu
K
3
Cool
Set to
74
Return Setting
4
Cool
Set to
74
Return Setting
Low Medium
High
Auto
A
5
English
● Press On/Off button.
The Operation lamp (green) will
illuminate and the system will start
operating.
● The setpoint will increase by
1°F (or 1°C) when
and decrease by 1°F (or 1°C) when
F
button is pressed.
* Setpoint is not available in fan or dry mode.
● To change the fan speed, press the
speed control button and select the
desired fan speed from Low, Medium,
F
High, or Auto.
* Depending on the type of indoor unit, the adjustment levels may
be two levels of "Low" and "High" or three levels of "Low",
"Medium", and "High".
* The system may be in automatic fan speed control for equipment
protection purposes.
* The system may be in automatic fan speed control according to
the room temperature. It is normal for the fan to intermittently stop
operating.
* It is normal for a delay to occur when changing the fan speed.
* In auto mode setting, the fan speed setting is adjusted
automatically according to setpoint and indoor temperature. In
Fan mode, the fan speed setting is always at High.
● Adjust Airfl ow Direction from the main menu
(see page 23)
* If the connected indoor unit model does not include oscillating
louvers this function will not be available.
button is pressed
.
Fan
11