Refrigerator Features - IKEA P9WB2L Manual De Instrucciones Para El Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

REFRIGERATOR FEATURES

Your model may have some or all of these features.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
Refrigerator Shelves
(number of shelves varies by model)
Store similar foods together and adjust the shelves to fit different
heights. This reduces the time the refrigerator door is open and
saves energy.
To Remove and Replace a Shelf:
1. Lift the back of the shelf to remove from the ribs. Pull the shelf
forward until it is released.
2. Replace the shelf by aligning the shelf with the ribs. Slide the
shelf onto the shelf supports. Be sure that the shelf is securely
in position.
Deli Drawer
(on some models)
The deli drawer stores raisins, nuts, spreads, and other small
items at normal refrigerator temperatures.
To Remove and Replace the Deli Drawer:
1. Remove the deli drawer by sliding it straight out to the stop.
Lift the front and out of the ribs. Tilt the drawer sideways to
remove it from the refrigerator compartment.
2. Replace the deli drawer by sliding it back past the stop and
pushing it into place.
Convertible Vegetable/Meat Drawer,
Crisper, and Covers
(on some models)
Crisper and Convertible Vegetable/Meat Drawers
To Remove and Replace Drawers:
1. Slide crisper or meat drawer straight out to the stop. Lift the
front of drawer with one hand while supporting the bottom of
drawer with the other hand and slide the drawer out the rest
of the way.
2. Replace the crisper or meat drawer by sliding it back in fully
past the drawer stop.
Crisper and Convertible Vegetable/Meat
Drawer Covers
To Remove and Replace Covers:
1. Remove the crisper and meat drawer. Tilt the front of the shelf
up and pull to release the stoppers from the ribs. Pull the
cover forward until it is released. Repeat steps to remove the
meat drawer cover.
2. Replace the meat drawer cover into supports or slides on side
walls of the refrigerator and slide the front of the cover frame
into place. Repeat steps to replace the crisper cover.
Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and
moisture-proof. Rewrap if necessary. See the following chart for
storage times. When storing meat longer than the times given,
freeze the meat.
Fresh fish or shellfish
Chicken, ground beef, variety
meat (liver, etc.)
Cold cuts, steaks/roasts
Cured meats
Leftovers — Cover leftovers with plastic wrap, aluminum foil, or
plastic containers with tight lids.
Crisper Humidity Control
(on some models)
You can control the amount of humidity in the moisture-sealed
crisper. Adjust the control to any setting between Fruit (left side)
and Vegetables (right side).
Fruit (left side — open) lets moist air out of the crisper for best
storage of fruits and vegetables with skins.
Fruit: Wash, let dry and store in refrigerator in plastic
bag or crisper. Do not wash or hull berries until they are
ready to use. Sort and keep berries in original container
in crisper, or store in a loosely closed paper bag on a
refrigerator shelf.
Vegetables with skins: Place in plastic bag or plastic
container and store in crisper.
Vegetables (right side — closed) keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
Leafy vegetables: Wash in cold water, drain and trim or
tear off bruised and discolored areas. Place in plastic bag
or plastic container and store in crisper.
Use same day purchased
1-2 days
3-5 days
7-10 days
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

P9rfwb2l

Tabla de contenido