Stihl AWG Manual De Instrucciones página 19

1
Cutting attachment turns away from
position of equilibrium:
R
1
Attach test weight to blade tooth at
N
distance R.
1
If the cutting attachment turns away
–
from the position of equilibrium in
the other direction, see column B,
out-of-balance is within the
permissible tolerance.
corrections to a blade tooth are
necessary.
AWG
1
2
If the cutting attachment turns away
–
from the positon of equilibrium in the
same direction, out-of-balance is
outside the permissible tolerance.
The blade tooth marked in column C
has to be reworked.
Correcting out-of-balance is achieved by
2
removing material from the blade tooth
concerned. Repeat the procedure until
cutting attachment is properly balanced.
2
No
2
English
17