MESTO 3593 Serie Instrucciones De Uso página 16

Preparation
Observe the instructions in the section entitled „Safety".
The device must be in an upright position.
into the tank.
1. Pull up the red button on the safety valve [12] until all excess pressure is released from
the tank. (Fig. 4).
2. Press the pump handle [13] down and turn it counterclockwise.
3. Unscrew the pump [2] from the tank [1]. (Fig. 6).
+
4. Add the spraying liquid to the tank [1] (Fig. 7).
5. Screw the pump [2] into the tank [1]. (Fig. 9).
6. Press the pump handle [13] down and turn it clockwise.
+
8. Press the pump handle [13] down and turn it counterclockwise.
Ensure that the initial pressure is not higher than 15 bar (218 psi).
7. When the required pressure has built up
hose [17].
(Fig. 5).
(Fig. 10).
in the tank [1] (Fig. 11).
(Fig. 5).
(88 psi)
16
, remove the compressed-air
(Fig. 12).