Omron M1 Plus Manual De Instrucciones página 19

HEM-4011C.book Page 19 Tuesday, August 9, 2005 10:35 AM
• The current time continues to be displayed while the cuff is
being inflated.
Note: Do not inflate the arm cuff more than necessary.
3.
Measurement starts.
Measurement starts automatically
after you stop inflating the arm cuff.
Decreasing numbers appear on the
display and the heartbeat symbol
flashes.
Remain still and do not talk during measurement.
During measurement, the buzzer (if set to "on") will beep in
rhythm with your heartbeat.
Note: To cancel a measurement, press the I/O button to turn
off the unit and press the air release button to release
the air in the arm cuff.
Common Causes of Inaccurate Results
Arm cuff is too loose.
Note: If the arm cuff is at a lower position than
your heart use cushions etc., to adjust the
height of your arm.
Movement or talking Leaning forwards.
during measurement.
3.Using the Unit
EN
19