HEM-4011C.book Page 33 Tuesday, August 9, 2005 10:35 AM
Storage
Keep the unit in its storage case when not in use.
1.
Unplug the air tube from the air connector.
2.
Gently fold the air tube into the arm
cuff.
Note: Do not bend the air tube
excessively.
3.
Place the arm cuff, inflation bulb
and main unit in the storage case.
Do not store the unit in the following situations:
• If the unit is wet.
• Locations exposed to extreme temperatures, humidity, direct
sunlight, dust or corrosive vapours.
• Locations exposed to vibrations, shocks or where it will be at
an angle.
• Locations exposed to chemicals or corrosive vapours.
6.Maintenance and Storage
33
EN