Program Play - JVC XL-PM25SL Instrucciones De Funcionamiento

1,3,5
1
PROGRAM
2
3
PROGRAM
4
5
PROGRAM
6
(For MP3)
Repeat steps 2-5 to select other tracks.
(Para MP3)
Repita los pasos 2-5 para seleccionar otras
melodías.
(Voor MP3)
Herhaal de stappen 2-5 om de andere mu-
ziekstukken te kiezen.
(For Audio CD)
Repeat steps 4 and 5.
(Para CD de audio)
Repita los pasos 4 y 5.
(Voor audio-CD)
Herhaal de stappen 4 en 5.
7
17
2,4
7
a
b
c
d
Other Play Methods

Program play

You can program up to 64 tracks in any desired order
including the same tracks.
3
For Audio CD, go to step
little, operation is the same.
During playback or in stop mode,
1
(MP3 only) Press PROGRAM.
"PROG" lights up
Program sequence number
2
(MP3 only) Select the desired group num-
ber. (e.g. 02)
Group number
3
Press PROGRAM.
4
Select the desired track. (e.g. 03)
Track number
5
Press PROGRAM
6
For MP3, repeat steps 2-5 to select other tracks.
For Audio-CD, repeat steps 4 and 5.
7
Press 6.
To confirm the program
In stop mode, press PROGRAM repeatedly. The pro-
grammed track number will successively appear together
with the program sequence number. At this time, you
can change the program, if required.
If the programmed tracks are less than 64, track number
" " appears for the youngest programmable se-
quence number, enabling further programming.
To delete the entire program
Set RESUME to "OFF", then turn off the unit.
. Though the display differs a