Unold 86840 Instrucciones De Uso página 21

Setting the speed
6. Turn the „Speed" switch until the appliance is working at the desired speed.
The appropriate setting is shown by the respective indicator light:
1-2 Low speed
3-5 Medium speed
6-8 High speed
Swing function/oscillation vertical
7. Press the „Up/Down Swing" button to switch on the up and down swing
function. Press the button again to stop the appliance in the current position,
the fan however continues to run.
Swing function/oscillation horizontal
8. Press the „Left/Right Swing" button to switch on left to right swing function.
Press the button again to stop the appliance in the current position, the fan
however continues to run.
Note: Both functions can be used simultaneously.
Timer
9. Via the „Timer" button you can select the desired runtime of the appliance.
This is possible in the range of 1, 2, 4 or 8 hours. Press the „Timer" button
until the indicator light for the selected time is illuminated. After this time
elapses the appliance switches off automatically. If you do not make a time
setting, the appliance will run continuously.
Setting the mode
Press the „Mode" button and select the desired operating mode. You can
select either Near-Natural mode or Sleep mode. Press the „Mode" button
repeatedly until the desired setting is shown through the appropriate
indicator light.
Natural mode
Symbol
The appliance works with alternating speeds that are similar to the natural
movement of air.
Stand 26.2.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
21 von 64