Cleaning And Care - Unold 86840 Instrucciones De Uso

DE
„Temperature Sense" mode
EN
Symbol
The appliance works as in near-natural mode at different speeds, which
FR
adapt to the ambient temperature
NL
If you do not select a function, the appliance works in normal mode.
IT
Switching off
10. Press the „ON/OFF" button again or the „ON/OFF" button on the remote
ES
control unit to switch off the appliance. When you are no longer using the
PL
appliance, unplug the power plug from the electrical outlet.

CLEANING AND CARE

Switch off the appliance, by pressing the „ON/OFF" button, and unplug the
power plug from the electrical outlet.
Wait until the appliance has come to a complete standstill.
Never immerse the appliance in water. The motor or electrical components
of the appliance must not get wet.
1. Never use any abrasive scouring agents, steel wool, metal objects, hot clean-
ing agents or disinfectants.
2. Wipe off the housing and grille of the fan with a slightly dampened cloth.
3. To clean the impeller, you can remove the front basket cover. Only open the
appliance when it is switched off, and the power plug has been unplugged
from the electrical outlet!
4. Remove the front cover by turning it from „Lock" to „Open". Take out the
impeller by removing the locking screw (turn it clockwise). Carefully clean
the impeller with a soft, damp cloth.
5. Fasten the impeller with the locking screw (turn it counter-clockwise!) and
carefully fit on the front basket cover. Turn the basket cover to „Lock", the
basket cover is securely locked only after this has been done.
6. Store the fan in a dry, safe place so that it is protected from dust, impact,
heat and moisture. We recommend that you store the original packaging
and stow the appliance in the original packaging when the appliance is not
needed.
22 von 64
Copyright UNOLD AG | www.unold.de
Stand 26.2.2020