Starting Up The Laser; Install Or S Et Up Laser For Use; Switch On The Laser - Nedo PRIMUS 2 H Manual De Instrucciones

EN Operating Instructions

6 Starting up the laser

6.1 Install or s et up laser for use

The laser can be installed or set up in a horizontal depending on the use
situation.
Horizontal on tripod
Set laser to working height
Use integrated spirit level to align laser
CAUTION!
Unevenness, soft surfaces and vibrations impair the stability of the laser or tripod.
f When installing/setting up the laser, ensure it has a safe, firm foothold.
NOTE
The cap with the axis markings is pushed
on. If the cap has been removed, it must be
pushed on as shown to the right, with the X
and Y axes pointing in the right direction.

7 Switch on the laser

AUTOMATIC operating mode is the default setting each time the laser is swit-
ched on.
NOTE
Despite careful setting up, warnings and error messages can appear in the display in
AUTOMATIC operating mode due to external influences and strong vibrations. For
description and remedies, see Chapter 9.
Set up horizontally
HORIZONTAL laser projection
23