Starting Up The Laser Primus 2 H2N/H2N; Install Or Set Up Laser For Use - Nedo PRIMUS2 H2N Manual De Instrucciones

EN Operating instructions
32
6

6.1 Install or set up laser for use

CAUTION!
NOTE

Starting up the laser PRIMUS 2 H2N/H2N+

The laser can be installed or set up in a horizontal position.
Horizontal on tripod Set up horizontally
Set laser to working height
Use integrated spirit level to align laser
Unevenness, soft surfaces and vibrations impair the stability of the laser or tripod.
f When installing/setting up the laser, ensure it has a safe, firm foothold.
The cap with the viewfinders and axis
markings is removable and can be replaced
with an optional telescopic sight.
If the cap is re-attached, it must be pushed
on as shown on the right, with the X and Y
axes pointing in the right direction.
HORIZONTAL laser projection