KPS PA20 MINI Manual De Funcionamiento página 15

KPS-PA20 MINI • Digital clamp meter
• When voltage > 60V DC or AC peak, keep your fingers behind the finger
guards.
• Verify the Meter's operation by measuring a known voltage before and after
using it. Do not use the Meter if it operates abnormally. Select the highest
range if the value scale to be measured in the manual range is unknown.
• Do not take voltage measurement if the value between the terminals and
earth ground exceeds 600V.
• Disconnect the test leads from the circuit under test before turning the rotary
selector to change functions.
• Disconnect circuit power and discharge all high voltage capacitors before
testing resistance, continuity, diodes, or capacitor.
• Do not store or use the meter in areas exposed to direct sunlight, at high
temperature or with high relative humidity.
• Do not touch live circuit or exposed metal.
4. MAINTENANCE
• Before opening the rear of the meter, disconnect test leads from all sources
of electric current.
• Use damp cloth and mild detergent to clean the meter; do not use abrasives
or solvents.
• Whenever it is likely that safety protection has been impaired, make the
Meter inoperative and secure it against any unintended operation.
• Have the Meter serviced only by qualified service personnel
5. INTRODUCTION
This meter 3 3/4 digits with steady operations,fashionable structure and highly
reliable measuring instrument. The Meter uses large scale of integrated circuit
with double integrated A/D converter as its core and has full range overload
protection. The meter can perform measurements of AC current, AC/DC volt-
age, resistance, capacitance as well as continuity and diode test.
6. DESCRIPTION
(1) Transformer Jaws:
Designed to pick up the AC current flowing through the conductor.
(2) Hand Guards:
To protect user's hand from touching the dangerous area..
(3) Rotary Switch
15