Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Select the highest range if the value scale to be measured in the manual
range is unknown To avoid harms to you or damages to the Meter from
electric shock.
AC Voltage Measurement
(1)
Plug the black test lead into the COM terminals and the red test lead into
the INPUT terminals
(2)
Set the rotary switch to V
Connect the test leads across with the object being measured.
(3)
The measured value shows on the display.
To avoid harms to you or damages to the Meter from electric shock.
AC Current Measurement
(1)
Set the rotary switch to proper current range.
(2)
Press the lever to open the transformer jaws, centre the conductor within
the transformer jaw. Please only measure one conductor each time.
(3)
The measured value shows on the display.
Select the highest range if the value scale to be measured is unknown, then
adjust the rotary switch until get satisfactory resolution. To avoid harms to
you or damages to the Meter when measuring exposed conductor.
Measuring Resistance
(1)
Plug the black test lead into the COM terminals and the red test lead into
the INPUT terminals.
(2)
Set the rotary switch to
the test leads across with the object being measured.
(3)
The measured value shows on the display.
KPS-PA20 MINI • Digital clamp meter
WARNING
and press SEL button switch to AC voltage.
WARNING
WARNING
and press SEL button to switch to Ω. Connect
18
Publicidad
Tabla de contenido
