Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
When LCD display 'OL', select a higher range to measure. When measuring
in-circuit capacitance, make sure that the power of the circuit under test has
been turned off and that all capacitors have been fully discharged.
Measuring temperature
(1)
Set the rotary switch to TEMP.
(2)
LCD displays Ambient temperature.
(3)
Si es necesario, conecte el terminal rojo del termopar (tipo K) al terminal
INPUT y el terminal negro al terminal COM y mida la temperatura de la
superficie del objeto o de las inmediaciones del mismo con la sonda de
termopar.
(4)
The Measured value shows on the display.
Measuring frequency and duty
(1)
Plug the black test lead into the COM terminals and the red test lead into
the INPUT terminals
(2)
Set the rotary switch to V
mode. Connect the test leads across with the object being measured.
(3)
En la pantalla se muestra el valor obtenido.
8.
ACCURATE SPECIFICACIONS
• Accuracy: (a% reading + b digits), guarantee for 1 year
• Temperature measurement: -20ºC~750ºC
• Relative humidity: 75%R.H
• Temperature coefficient: 0.1x(specified accuracy)/1ºC
Center the conductor within the transformer jaw, else may cause 1.5% posi-
tion error in AC current mode.
KPS-PA20 MINI • Digital clamp meter
WARNING
and press Hz% button switch to Hz or DUTY
Mark
Conductor
Mark
Mark
20
Publicidad
Tabla de contenido
