KPS PA20 MINI Manual De Funcionamiento página 16

Select proper Range and function.
(4) HOLD button
Press 'hold' button the meter stop updating the LCD panel (LCD displays
"H") press the button again,the meter exit hold mode
(5) RAN auto/manual Range button
Under Voltage,resistance measurement mode,the default mode is
autorange,press RAN button switch to manual range; while in manual
range mode changes the full-scale range, press this button more than 2
seconds, the meter switches to autorange.
(6) LCD screen
Max Display 3999
(7) INPUT Terminals
Input positive terminals for all measurement except current measure-
ment ,connected with red test leads.
(8) COM Terminals
Input common terminals for all measurement except current measure-
ment , connected with black test leads.
(9) Hz% Frequency and duty Switch Buttono
Under AC voltage measurement, press Hz% button to select a function
from voltage, frequency to duty.jo.
(10) SEL: Function selecting button
In voltage mode, press SEL button to toggle from DCV to ACV. In
mode, it is used to select a function from resistance,capacitance, diode
to continuity.
(11) Back light
Press the '
light,press again to turn it off.
(12) Trigger
Press the lever to open the transformer jaws. When the pressure on the
lever is released, the jaws will close.
(13) Transformer Jaws Lighting Bulb
Switch rotary switch to current position,then turn on lighting Bulb and
back light.
KPS-PA20 MINI • Digital clamp meter
' button more than two seconds to turn on the back
16