Safety Instructions; Risk Of Electric Shock - Silvercrest EDS - SSM 600 C2 Instrucciones De Uso

Safety instructions

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power
►
sockets supplying a mains power voltage of
220 – 240 V ~ / 50 Hz.
In event of operating malfunctions and before
►
cleaning the appliance, remove the plug from the
mains power socket.
Do not expose the appliance to moisture and do
►
not use it outdoors.
If liquid gets into the housing, disconnect the ap-
►
pliance from the mains power socket immediately
and have it repaired by a qualifi ed technician.
Always pull on the plug to disconnect the appliance
►
from the mains; never pull on the power cable itself.
Do not kink or crush the power cable, and route
►
the cable so that it cannot be stepped on or
tripped over.
To avoid risks, arrange for defective plugs and/or
►
power cables to be replaced at once by qualifi ed
technicians or our Customer Service Department.
Do not attempt to open the hand blender's motor
►
casing. If you do so, the safety of the appliance is
no longer assured and the warranty will become
void.
EDS-SSM 600 C2
GB
MT
51