Symbols On The Product - Husqvarna R112C Manual De Usuario

Symbols on the product

WARNING: Careless or incorrect use can
result in serious injury or death to the
operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Rotating blades. Keep body parts away from
the cover when the engine is on.
Warning: rotating parts. Keep body parts
away.
Look out for ejecting objects and ricochets.
Never use the product if persons, especially
children, or animals, are in the vicinity.
Look behind you before and while you move
the product in reverse.
Never cut grass across a slope. Do not cut
grass on ground that slopes more than 10°.
To cut grass on slopes on page 9 .
See
Never carry passengers on the product or
equipment.
Move forward.
Neutral gear.
Move rearward.
Clutch (R112C5).
Choke (For R112C and R112C5).
Parking brake.
1466 - 002 - 28.09.2020
The product agrees with the applicable EC
directives.
Noise emission to the environment
according to European Directive 2000/14/EC
and New South Wales legislation "Protection
of the Environment Operations (Noise
Control) Regulation 2017". Noise emission
data can be found on the machine label and
in the Technical data chapter.
Always use approved hearing protection.
Stop the engine.
Start the engine.
Engine speed – fast.
Engine speed – slow.
Fuel.
Max. ethanol 10%.
The blades are engaged.
The blades are disengaged.
Transport position for the cutting deck.
Operation position for the cutting deck.
Oil level.
Note: Other symbols/decals on the product refer to
certification requirements for some commercial areas.
5