To Replace The Fuel Filter; To Replace The Air Filter, R112C - Husqvarna R112C Manual De Usuario

4. For R112C5, put the gearshift lever in the neutral
position (N).
5. If the product starts to move, let an approved service
agent adjust the parking brake.
6. Press the parking brake pedal again to release the
parking brake.

To replace the fuel filter

1. Open the engine cover.
2. To access the fuel filter, remove the 4 screws and
remove the protective cover.
3. Move the hose clips away from the fuel filter with a
pair of flat pliers.
4. Pull off the fuel filter from the hose ends.
5. Press the new fuel filter into the ends of the hoses.
Apply liquid detergent to the ends of the fuel filter to
make the connection easier.
6. Push the hose clips against the fuel filter.
7. Attach the protective cover with the 4 screws.

To replace the air filter, R112C

1. Open the engine cover.
20
N
2. Loosen the knobs that hold the air filter cover and
remove the cover.
3. Remove the air filter cartridge from the filter housing.
4. Put a new air filter cartridge on the air hose.
5. Push the air filter cartridge into correct position.
6. Attach the air filter cover and tighten the knobs.
1466 - 002 - 28.09.2020