To Remove The Belt Cover; To Examine The Steering Cables; To Remove The Covers; To Remove The Engine Cover - Husqvarna R112C Manual De Usuario

To clean the cold air intake of the
engine, R112C5, R115C
WARNING: Stop the engine. The cold air
intake rotates and can cause injury to your
fingers.
• Make sure that the intake grille on the engine cover
is not blocked. Remove grass and dirt with a brush.
• Open the engine cover. Make sure that the cold air
intake is not blocked. Remove grass and dirt with a
brush.

To remove the covers

To remove the engine cover

1. Release the clips on the engine cover.
2. Fold the engine cover rearward.
1466 - 002 - 28.09.2020

To remove the belt cover

1. Release the clip on the belt cover.
2. Remove the belt cover.

To examine the steering cables

1. The steering cables are correctly tightened if you can
manually move them 5 mm up or down in the groove
on the steering collar.
2. If the wires are too loose, let an authorized service
agent adjust them.

To do a check of the parking brake

1. Park the product on a hard surface that slopes.
Note: Do not park the product on a grass slope when
you do a check of the parking brake.
2. Press the parking brake pedal down (A).
3. Press and hold the lock button (B) and release the
parking brake pedal while the button is pressed.
B
A
Note: For R112C, R115C, the parking brake is on
the left side. For R112C5, the parking brake is on the
right side.
B
A
19