Campbell Hausfeld TL146200AJ Manual Del Operador página 9

Preparation
(Continued)
trIgger
When ready to begin (cutting, sanding,
grinding, scraping or grout removal)
squeeze the trigger to operate your multi-
function oscillating tool. See Figure 7.
Operation
ProPer technIques
PrActice using the tool
Learn how to let the speed and the feel
of the tool in your hands work for you
to get the most out of your tool. Move
the back end of the tool in a left to right
motion to increase the speed of a cut.
Start the tool before the accessory
contacts the workpiece. This will prevent
stalling during start up.
California ProPosition 65
some dust created by power
sanding, sawing, grinding,
drilling and other constructive
activities, contains chemicals known in
the state of California to cause cancer,
birth defects or other reproductive harm.
some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from
chemically treated lumber
Your risk from these exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these materials work in a well
ventilated area with approved personal
safety equipment, including respiratory
protection.
www.campbellhausfeld.com
Tl146200AJ and Tl146299AJ
Figure 7 - trigger
Figure 8 - hold flush to surface
9