Waeco CoolMatic CRX50 Instrucciones De Montaje página 48

Using the refrigerator
➤ Switch the refrigerator on by pressing the on/off button.
I
NOTE
8
After switching on, the refrigerator needs some time before the
compressor starts up.
Setting the temperature
➤ Press the temperature selection button to set the temperature to one of
four levels between "cool" and "very cold".
The number of LEDs which light up above the temperature selection but-
ton indicate the temperature range:
– 1 = cool
– ...
– 4 = very cold
➤ Press the temperature selection button again to switch from level 4 to
level 1.
I
NOTE
The cooling performance can be affected by:
 The ambient temperature
 The amount of food to be conserved
 The frequency with which the door is opened.
If the ambient temperature is at 16 °C to 20 °C, set the refrigerator
to at least level 2.
Setting the fast cooling function (CRX50, CRX65, CRX80 only)
A
NOTICE!
 Only use the fast-cooling function when the removable freezer
compartment is not being used. Otherwise there is a risk that
the freezer compartment becomes too cold and condensate
cannot be prevented from forming on the outside of the refrig-
erator. The energy consumption will also increase dramati-
cally.
 Note that bottles and other containers can burst when frozen.
 Note that it is difficult to open the refrigerator directly after
closing it.
The option of operating the refrigerator using a fast-cooling function allows
temperatures suitable for freezing foods to be reached.
➤ Press the temperature selection button for longer than 3 seconds.
48
CoolMatic
EN