Installing And Connecting The Refrigerator; Safety Instructions For Installation On Boats - Waeco CoolMatic CRX50 Instrucciones De Montaje

CoolMatic
7 Installing and connecting the
refrigerator
7.1

Safety instructions for installation on boats

Please note the following instructions for installation on boats:
D
DANGER!
If the appliance is powered by the mains, ensure that the voltage
supply has a residual current circuit breaker.
A
NOTICE!
 The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account
of this. If you have any questions regarding installation, consult
your specialist dealer.
 Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 7, page 6).
 The appliance is designed for ambient temperatures between
+16 °C and +43 °C.
7.2 Installing the refrigerator
Observe the following when installing the refrigerator:
 Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 7, page 6).
Key to fig. 7, page 6
No. Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Spacing above the refrigerator if there is not sufficient air to
circulate above or at the side.
EN

Installing and connecting the refrigerator

43