Ordering Spare Parts; Technical Specifications - Grillo G131 Manual De Instrucciones

– 5 right tines with screws
– 5 left tines with screws

ORDERING SPARE PARTS

Always state the machine serial number and the code number of the part to be replaced.
Contact your local dealer. Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 381333 - Fax 0039 / 0547 / 632011
Web site: www.grillospa.it - E-mail: grillo@grillospa.it
ENGINE:
LOMBARDINI 3 LD 510 with electric starter
MACHINE
Clutch: active disc clutch.
Gearbox: with gears in oil bath; 4 forward speeds and 2 reverse in the walking tractor version and
2 forward speeds and 2 reverse in the sickle bar version.
Travel speeds in km.p.h. (mph) with engine at 3000 rpm are the following:
Gears
Ist
IInd
IIIrd
IVth
Ist REVERSE
IInd REVERSE
PTO: upper synchronized P.T.O. (optional); lower P.T.O. at 1028 rpm clockwise, with engine at
3000 rpm.
Reverse Speed Interference: a safety device which prevents the engagement of the reverse
speed if the P.T.O is engaged.
Wheels: Tires 5.00-12 and 6.5/80-12 and iron wheels 46x12 cm.
Differential gear: with locking device on the handle handlebar.
Handlebar: reversible with height and width adjustment.
Rotary tiller: standard 70 cm (27.5") adjustable at 55 cm (21.6") and 85 cm (33.4").
Weight: with rotary tiller and Diesel engine 215 kilos (474 lb).
Implements and attachments: 155 cm Tirol cutter bar, ploughs, adjustable furrower, furrower
behind the tiller, 150x110 cm towed trailer, rotary tiller wheel, tow bar, 68 cm all purpose flail, 80 cm
two stage snow thrower, 30 cm rotary plough, 75 cm stone-burier, 75 cm power harrow, rotary
plough, rotary tiller and wheels adjustments, wheel weights, wheel extensions, 125 cm front snow
blade.
Translation of the original instructions
TECHNICAL SPECIFICATIONS G131
and also available with lights kit.
Speeds with tyres
1,18
2,42
3,44
7,06
1,72
3,53
5.00-12 Speeds with tyres 6.5/80-12
1,21
2,50
3,57
7,31
1,78
3,60
7