Husqvarna TE 250 2011 I.E. Instrucciones De Uso página 104

WARNING!
Do not attempt to ride the motorcycle until
the brake lever or pedal are
fully effective. Pump the brake
lever or pedal until the pads are against the
discs.
The brake will not function on the first ap-
plication of the lever or pedal.
EN - 48
BRAKE DISC WEAR
Measure the thickness of each disc at the point where it has
worn the most. Replace the disc if it has worn past the service
limit.
Disc Thickness
SERVICE
DISC STANDARD LIMIT
Front 3 mm 2,5 mm
(0.12 in.) (0.1 in.)
Rear 4 mm 3,5 mm
(0.16in.) (0.14in.)