5.0
5.3
Cleaning and disinfecting the unit
surface
Always disconnect the device from the power line, before cleaning and disinfecting the surface.
Wipe the surface clean with a cloth soaked in a cleaning solution or disinfectant. Liquids must not enter the device. All of the
cleaning solutions and disinfectants listed below can be used.
Should liquids have penetrated into the device, it must be inspected by an authorized service technician before
being used again.
Recommended instrument disinfectants
Disinfectant
GIGASEPT FF
(concentrate)
Sekusept PLUS
(concentrate)
Mucozit-T
(concentrate)
Recommended surface disinfectants
Disinfectant
TERRALIN
(Concentrate)
QUATOHEX
(Concentrate)
Incidin Plus
(Concentrate)
Pursept-A
(Disinfectant spray or
disinfectant cloths)
Recommended cleaning agents
Disinfectant
neodisher MediClean forte
(Application concentrate)
neodisher AN
30
UK
Ingredients
succinic acid dialdehyde
dimethoxy tetrahydrofurane
corrosion protection components
non-ionic tensides and odoriphores
glucoprotamine
non-ionical tensides
dissolvents, complexing agents
bi3 (3-aminoprophyl)laurylamine
alkyldimethylbenzylammoniumchloride
cocospropylendiamine-1,5 guanidinium-acet.
Ingredients
Benzal conium chloride
Phenoxypropanole
Didecyl dimethyl
ammonium chloride
Benzal conium chloride
Bi-guanidinium acetate
Polymer biguanid
Cleaning agents
Glucoprotamin
Nonionic tensides
Solvents, complexing agents
Ethanol
Glyoxal
QAV
Ingredients
non-ionic tensides
NTA (nitrilotriacetic acid)
enzymes, preservative agent
Phosphate
non-ionic tensides
enzymes
E
(in 100 g)
Manufacturer
11.0 g
Schülke & Mayr, Norderstedt
3.0 g
25.0 g
Henkel, Düsseldorf
8.0 %
Merz & Co., Frankfurt/Main
19.0 %
7.0 %
(in 100 g)
Manufacturer
20
g
Schülke & Mayr, Norderstedt
35
g
Braun, Melsungen
14
g
10
g
7,5
g
0,5
g
26,0
g
Henkel, Düsseldorf
38,9
g
Merz & Co., Frankfurt/M.
0,1
g
0,05
g
(in 100 g)
Manufacturer
< 5 g
Dr. Weigert, Hamburg
5-15 g
> 30 g
Dr. Weigert, Hamburg
< 5 g
Page 30
30