Overview; Design And Function; Choosing The Correct Breaker For A Task; Main Parts - Atlas Copco TEX 20PS Instrucciones De Seguridad Y De Funcionamiento

TEX 20PS, 21PE, 32P/PS, 33PE, 39P/PS, 40PE, P60/S,
P90/S

Overview

To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.

Design and function

TEX 20PS-TEX 21PE, TEX 32P/PS-TEX 40PE and
TEX P60/S-TEX P90/S are ranges of hand-held,
pneumatic breakers designed for medium to heavy
demolition of materials such as concrete, asphalt
and brickwork. The pneumatic breakers are designed
for vertical use. No other use is permitted.
Recommended insertion tools are listed in the spare
parts list.
Choosing the correct breaker
for a task
It is important to choose the correct size of breaker
for the work to be performed.
A breaker that is too small means that the work will
take longer.
A breaker that is too large means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of breaker
is that a normal sized piece of broken material should
be removed from the workpiece within 10–20
seconds operation.
● If it takes less than 10 seconds a smaller breaker
should be selected.
If it takes more than 20 seconds a larger breaker
●
should be selected.
© 2010 Atlas Copco Construction Tools AB | No. 9800 0650 90a | 2010-01-01
Original instructions
Safety and operating instructions

Main parts

TEX 20PS, 21PE
TEX 32P, 32PS, 33PE, 39P, 39PS, 40PE
13