Operation; Start And Stop; Operating; Starting A Cut - Atlas Copco TEX 20PS Instrucciones De Seguridad Y De Funcionamiento

TEX 20PS, 21PE, 32P/PS, 33PE, 39P/PS, 40PE, P60/S,
P90/S

Operation

WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
► Learn how the machine is switched off in the event
of an emergency.
► Stop the machine immediately in all cases of
power supply interruption.

Start and stop

Start the pneumatic breaker by pressing down the
trigger.
Stop the pneumatic breaker by releasing the trigger.
The trigger will automatically return to the stop
position.

Operating

Starting a cut

♦ Stand in a stable position with your feet well away
from the inserted tool.
♦ Press the machine against the working surface
before you start.
♦ Start collaring at such a distance from the edge
that the machine is capable of breaking the
material without levering.
© 2010 Atlas Copco Construction Tools AB | No. 9800 0650 90a | 2010-01-01
Original instructions
Safety and operating instructions
Never try to break off too large pieces. Adjust the
♦
breaking distance (A) so that the inserted tool does
not get stuck.

Breaking

♦ Let the machine do the work; do not press too
hard. The vibration-reducing handle must
absolutely not be pressed all the way down to the
base.
♦ For pneumatic breakers with vibration-reducing
handles: The feed force should be adapted so that
the handles are pressed down 'half way'. The best
vibration damping and breaking effect is achieved
at this position.
Avoid working in extremely hard materials for
♦
example granite and reinforcing iron (re-bar) which
would cause substantial vibrations.
Any form of idling, operating without insertion tool
♦
or operating with an uplifted machine must be
avoided.
♦ When the machine is lifted, the start and stop
device must not be activated.
Check regularly that the machine is well lubricated.
♦
17