Oase Filtral UVC 700 Instrucciones De Uso página 5

- English -
Installation (cont.)
Filtral UVC 1200
For installation using the nozzle set
1. Slide the clamping screw (D) down the nozzle tube (C) and screw on
to the branch valve (B) to secure the tube.
2. Screw in the nozzle mounting (E). Select a nozzle insert to use (F).
The fountain height and shape depend on the nozzle insert used.
3. Screw the assembly on the reduction element (A). Then screw on to
the connection thread of the UVC water housing (G) using the washer
(H).
4. If desired, screw the reduction element (I) and the stepped hose
adapter (J) on the lateral outlet of the branch valve (B).
● Connect tubing for additional water features to the lateral separately
regulated connection of the branch valve.
NOTE: Tubing is NOT INCLUDED.
● Connect the other end of the tubing to desired water feature or spitter.
Filtral UVC 700 / 1200
Setting the fountain/water feature
● Install the unit in the pond in a horizontal position on firm, sludge-free ground and
ensure that it is completely covered with water.
1. Pull the nozzle tube to the desired length.
2. Loosen the clamping screw to manuver the
nozzle tube.
3. Vertically align the nozzle tube and fasten
the clamping screw hand tight.
4. Fully open the rotary regulator (A) for
the fountain.
● The secondary rotary regulator (B)
is used to control the fountain/water
feature connected to the lateral outlet
of the branch valve.
● The additional water recirculation via
the lateral outlet improves the filtering
effect, even if the feature or the water
course is not connected.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
1.
4.
B
E F
D
J
C
I
2.
B
A
G
H
2.
A
3.
5