Omron HEM-670IT Manual De Uso página 41

4. Press the SET button to display the blood pressure and pulse rate for
the first measurement. Press the ( ) button to display the next
measurement. Press the SET button to display the average of the three
measurements.
5. Press the START/STOP button to turn the monitor off.
NOTES: • The three individual measurement results are not displayed
during the consecutive measurements. However, the results
for each individual measurement can be displayed after all
the measurements are completed.
• During the consecutive measurements the unit will repeat
the measurement in case of an error. After 3 errors the unit
will stop taking further measurements. If only two
measurements are successful, the average of these two
measurements will be displayed. If only one measurement
is successful, this result will be displayed.
TAKING A MEASUREMENT
41