Setting The Measurement Wrist - Omron HEM-670IT Manual De Uso

SETTING THE MEASUREMENT WRIST

The monitor is designed to take measurements on the left wrist or the right
wrist. The monitor is set to take measurements on the left wrist at the time
of purchase.
1. TO CHANGE THE SETTING
Press the START/STOP button
to turn the power off, then press
the SET button.
Continue to press the SET button
until the Wrist Screen displays.
The Wrist Screen displays with the current setting.
2. SELECTING LEFT WRIST OR
RIGHT WRIST
Press the ( ) button
to change the wrist setting to RIGHT.
Press the ( ) button
to change the wrist setting to LEFT.
3. CONFIRM THE SETTING
To continue to change other settings, press the SET button to confirm
the Measurement Wrist you selected. The Alarm Set Screen is
displayed.
If no other changes are needed, press the START/STOP button to turn
the power off.
Wrist Screen set to LEFT
Wrist Screen set to RIGHT
22 22