Selecting The Battery Type - ROBBE POWER PEAK ULTIMATE 2 Manual De Uso

SELECTING A MEMORY

SELECTING THE BATTERY TYPE

You can now select a battery type from NiCd, NiMH, LiPo or Pb (lead-acid) using the '+'
or '-' button. Press the 'ENTER' button again to confirm your selection.
SETTING THE CELL COUNT / BATTERY VOLTAGE
can now select a cell count for NiCd and NiMH batteries within the range 1 to 25 using
the '+' or '-' button. Press the 'ENTER' button again to confirm your selection.
With the two battery types LiPo (Lithium) and Pb (lead-acid) you enter the nominal batte-
ry voltage instead of the cell count.
The following voltages are available:
Cell count
1
2
3
4
5
Operating instructions
POWER PEAK ULTIMATE 2
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Memory. Press the
'ENTER' button and the '+' / '-' symbol flashes. You
can now select a memory in the range 0 to 9 using
the '+' or '-' button. Press the 'ENTER' button again
to confirm your selection.
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Battery Type. Press
the 'ENTER' button and the '+' / '-' symbol flashes.
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Cell Count. Press the
'ENTER' button and the '+' / '-' symbol flashes. You
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Battery Voltage. Press
the 'ENTER' button and the '+' / '-' symbol flashes.
For Lithium batteries you can now select a battery
voltage in increments of 3.7 V per cell using the '+'
or '-' button. Press the 'ENTER' button again to
confirm your selection.
Nominal battery voltage
3.7 Volts
7.4 Volts
11.1 Volts
14.8 Volts
18.5 Volts
13
No.
8470