Terminating A Charge / Discharge Process; Displaying Charge / Discharge Data - ROBBE POWER PEAK ULTIMATE 2 Manual De Uso

identical to a normal process initiated from a memory. The sequence is described in
Chapter 7.4.
During a charge or discharge process the essential data for this process is stored on the
chip.
10.

TERMINATING A CHARGE / DISCHARGE PROCESS

The processor always employs the ideal process by taking into account the charge para-
meters, with the result that the charger automatically terminates the charge or discharge
process exactly at the right moment.
10.1

DISPLAYING CHARGE / DISCHARGE DATA

Status display
flashing'F' (finish)
Battery voltage
Battery
type
Operating instructions
POWER PEAK ULTIMATE 2
First connect the BID chip to the charger using the
adaptor lead. This automatically causes the screen
display shown here to appear.
If the charge parameters on the chip are accepta-
ble, press the 'ENTER' button to prepare the pro-
cess. From this point on, the procedure is exactly
Elapsed char-
Charged-in
ge / discharge
or dischar-
time
ged capacity
Charge /
discharge
current
During a charge or discharge process the
values for that process are constantly
shown in the working display
(see Chapter 5.1).
If the process concludes successfully, the
charger alerts you with an audible beep.
The screen now displays the essential
data relating to that process, as shown in
the adjacent illustration.
19
No.
8470