Descargar Imprimir esta página

Cleaning; Storage - Silvercrest SHMSB 300 A2 Instrucciones De Uso

Ocultar thumbs Ver también para SHMSB 300 A2:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
ATTENTION! DAMAGE TO PROPERTY!
Do not operate the blender
for longer than 1 minute. After one minute of
use, allow the appliance to cool down fully.
5) When you have finished working with the
blender
, move the speed switch
to the "0" position and disconnect the mains
plug
from the wall power socket.
ATTENTION! DAMAGE TO PROPERTY!
Only clean the lower part of the blender
under running water. Do not allow water to
get inside the blender
damage to the appliance.
6) To clean the blender
fixture
by turning it.

Cleaning

DANGER – RISK OF ELECTRIC SHOCK!
Always remove the plug
socket before cleaning the appliance!
Risk of electric shock!
NEVER submerge the hand element
water or other liquids!
WARNING! RISK OF INJURY!
Take care when cleaning the blender
The blade is extremely sharp!
Never submerge the blender
under water. If necessary, clean the lower
part with the blade under running water.
Otherwise, the appliance could be irrepa-
rably damaged.
SHMSB 300 A2
continuously
back
. This could result in
, remove it from the
from the power
in
!
completely
Only clean the hand element
motor with a damp cloth and, if necessary, with
a mild detergent.
The whisks
and the kneading hooks
be cleaned under running water or in warm
water with detergent. Dry everything well after
cleaning.
We recommend cleaning the attachments
directly after use. This removes food residue
and reduces the risk of bacterial contamination.
Clean the lower part of the blender
water with a little detergent or under running
water. Wipe the upper part with a damp cloth.
If necessary, add a little mild detergent onto
the cloth. Afterwards, wipe off with a cloth
moistened only with water to ensure that no
detergent remains on the appliance.
ATTENTION! DAMAGE TO PROPERTY!
Only clean the lower part of the blender
under running water. Do not allow water to
get inside the blender
in damage to the appliance.
Clean the measuring jug
containing a mild detergent.

Storage

Store the cleaned appliance in a clean, dust-free
and dry location.
containing the
can
in warm
. This could result
in warm water
GB │ IE
 15

Publicidad

loading