C Marking
The meter complies with the following
EC Directives and European Standards:
Directive 2004/108/EC:
"Electromagnetic compatibility
(EMC)"
EN 61326-1 Electrical equipment for
measurement, control
and laboratory use
EMC Requirements
Part 1:
General requirements
Defined immunity to
interference:
Industrial areas,
continuous,
unmonitored operation
Limitation of emissions:
Residential areas,
Class B
Important Note:
The operator shall be responsible for
any modifications to Sartorius equip-
ment or connections of cables not sup-
plied by Sartorius and must check and,
if necessary, correct these modifications.
On request, Sartorius will provide infor-
mation on the minimum operating
specifications (in accordance with the
Standards listed above for defined
immunity to interference).
Directive 2006/95/EC:
"Electrical equipment designed for use
within certain voltage limits"
Applicable European Standards:
EN 61010 Safety requirements for
electrical measurement,
control, and laboratory
equipment
Part 1: General
requirements
If you use electrical equipment in
installations and under ambient condi-
tions subject to stricter safety standards
than those described in the manual, you
must comply with the provisions as
specified in the applicable regulations
for installation in your country.
17