Maintenance And Cleaning - Oase BioSmart Serie Instrucciones De Uso

- English -
Start-up
Important:
Prior to starting up the unit, check that all clamps on the internal cover are closed. The clamps for pond additives can

Maintenance and cleaning

Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:
• Prior to reaching into the water, disconnect the power supply to all units used in the water.
• Disconnect the power plug prior to carrying out work on the unit.
from outside.
Switch off the pump and open the unit cover.
1.
cleaning handles and "pump" several times neither
too strong nor too fast.
2. If necessary, unscrew the cover cap from the sludge
drain, open the slide valve, allow the water to drain
cleaning process 2 to 3 times, if necessary.
thoroughly in a bucket of pond water. To this effect,
press the engagement of the cleaning handles to the
side until the connection to the inner cover
disengages.
Release the clamps at the inner cover and remove
cover.
3.
clean the container, the inner cover, the cover and the
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
Connect power plug to the socket.
1.
3.
2.
5