Using The Powersweep - Stihl KW-KM Manual De Instrucciones

!
Warning!
Always stop the engine and make sure
that the sweeper belts have stopped
before doing any maintenance or repair
work or cleaning the PowerSweep. Do
not attempt any maintenance or repair
work not described in your owner's
manual. Have such work performed at
your STIHL service shop only.
!
Warning!
Check condition of sweeper belts at
regular intervals. Loose particles or
pieces of the belts could be thrown and
injure the operator or bystanders. To
reduce risk of injury from broken parts
replace damaged sweeper belts
immediately and always in pairs. Do not
reuse or attempt to repair damaged or
worn sweeper belts.
Store the PowerSweep CombiTool in a
dry and high or locked location out of
reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the machine" in the
CombiEngine manual.
KW-KM

Using the PowerSweep

Use the PowerSweep for sweeping
sand, stones, gravel, leaves and snow
on grass, concrete or asphalt and
removing standing water from solid
surfaces.
:
To reduce risk of accidents or injury,
remove all obstacles and objects
from the work area.
:
If the work area is very dry, spray it
with water if necessary to reduce
the amount of dust created.
: Push the PowerSweep steadily at
walking pace.
:
Always keep the drive tube at a
shallow angle (see illustration).
The steeper the angle between the
drive tube and the ground, the more
difficult it is to control the
PowerSweep.
English / USA
: Do not push the PowerSweep into
the ground.
Sweeping narrow areas
1
:
Guide the sweeper drum at right
angles to the direction of travel (1).
Sweepings are thrown forwards,
ahead of the operator.
The PowerSweep pushes back
toward the operator.
9