English / USA
Mounting Sweeper Drums
1
:
Fit grass shield (1) on end of
axle (2) and press home as far as
stop.
4
3
5
:
Push axle (2) onto the output
shaft (3).
:
Insert pin (4) through axle and
output shaft. Secure pin with cotter
pin (5).
12
2
:
Push sweeper drum assembly (6)
onto the axle (2) – note the installed
position (see illustration)!
2
6
2
7
2
8
8
:
Fit new cotter pin (7) in end of
axle (2) and bend over the ends (8)
of the cotter pin as shown.
:
Repeat the procedure on the other
side.
Always mount both sweeper drum
assemblies!
KW-KM