Approved Combiengines - Stihl KW-KM Manual De Instrucciones

English / USA
Sweeping wide areas
1
: Guide the sweeper drum at an angle
to the direction of travel (1).
Sweepings are thrown forwards to
one side.
The PowerSweep pushes back
toward the operator.
10
Sweeping corners
: Turn the PowerSweep over.
Sweepings are thrown back toward the
operator. For this reason:
:
Run the PowerSweep at a low
throttle setting only.
The PowerSweep pulls the operator
forward. Debris thrown back toward
the operator may affect footing.

Approved CombiEngines

Only use CombiEngines supplied by
STIHL or expressly approved by STIHL
for use with the CombiTool.
This CombiTool may be operated only in
combination with the following
CombiEngines:
STIHL KM 55 R, KM 55 RC, KM 85 R,
KM 110 R
The barrier bar must be mounted on
loop-handled units.
The CombiTool may also be mounted to
STIHL brushcutters with a split boom or
drive tube (T models).
Operation of this CombiTool is therefore
also permitted on the following power
tool models:
STIHL FS 55 RT, FS 55 RTC, FS 85 RT,
FS 83 RT
KW-KM