Cleaning And Care; Descaling - Unold 18590 Instrucciones De Uso

11. The kettle is fitted with a dry-operation cutoff that switches off the heating
elements when they become too hot, for instance when the kettle has boiled
dry. Allow the kettle to cool down. Then fill the kettle with cold water.
Boiling water can cause scalding. Therefore, please handle the appliance
with care when it contains hot water.

CLEANING AND CARE

1. Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little dishwash-
ing detergent. Do not use any abrasive scouring agents, steel wool, metal
objects, hot cleaning agents or disinfectants, since they can damage the
appliance.
3. The appliance must be completely dry on the outside before you use it
again.

DESCALING

1. To keep the appliance operating efficiently and to prolong its service life,
it should be descaled regularly, depending on the hardness of your water.
2. Use off-the-shelf descaling products for electronic kettles and comply with
the manufacturer's instructions. To descale, fill the kettle half full, maxi-
mum, otherwise the liquid can boil over and can cause severe injuries.
3. Heat the liquid (do not boil!) and allow it to sit for some time in the elec-
tronic kettle.
4. Pour the descaling solution out of the kettle.
5. Then fill it with fresh water and bring to a boil. Pour this water out as well.
Then rinse out the kettle at least twice with clean water.
Copyright UNOLD AG | www.unold.de
Before cleaning, always turn off the appliance and unplug it from
the electrical outlet.
Allow the appliance to cool before cleaning it.
17