Orbegozo CA 09160 BL Manual De Instrucciones página 12

CA 09160/90 BL
FUNCTION AND CHARACTERISTICS
1. This hood is made of high quality materials and with a modern design to fit the
design of your home.
2. Equipped with an electric motor of great power and low noise with filter for
the fat, easy to clean.
3. The grease filter is easy to remove and clean.
INSTALLATION
1. The hood should be installed at a distance of 65-75cm from the kitchen surface for better performance.
2. Make a hole in the cabinet, the size of the hole will be 500x275mm for model CA 09160 BL and
730x275mm for model CA 09190 BL.
3. Place the hood in the hole in the cabinet, tighten the screws with a screwdriver and make sure the hood
is securely fastened.
CHANGE OF BULB
Unplug the hood from the mains. Use a screwdriver to remove the 4 screws and remove the glass front.
Disconnect the cables and remove the glass, remove the light screws and replace the bulb.
USE
How to use the control panel:
It has 5 functions: low speed, medium speed, high speed, light and timer.
1. First connection: when the Hood is plugged in for the first time the control panel will light up and after 5
seconds it will turn off, this is normal.
12