Unpacking; Installation; Cover Removal - Vortice ECODRY Manual De Instrucciones

ENGLISH

Unpacking

1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hand dryer from the shipping carton, using care not to drop the appliance.
3. Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or damaged
parts. If the hand dryer is damaged, promptly inform the shipper or dealer where you purchased it.
Standard items included with the hand dryer are shown in fig. 1
1

Installation

Cover removal

1.1 Place the appliance on a cloth to avoid marking its surface.
1.2 Remove the two security screws on the bottom surface from the main body, using the service tool provided for
security screws (fig. 2).
1.3 Pull down the front cover and lift the front cover off the main body (fig. 3).
2
18
Installation Service Tool
template & Spare Screw
ECODRY
Wall mounting
anchors with screws
3
1
2
Flat cable clamp
& Screw