Overview Of The Lifting Column - RK Rose+Krieger RKPowerlift M Instrucciones De Montaje

6.4 Overview of the lifting column

1 Screw channels (M8) for fixing the lifting column
Connection for hand switch
2
(only for Start-Stop design)
3 Mains connection
4 Holder for primary fuse
5 Telescopic inner section
6 Plug (100/115/120/230V AC, max. 2.5 A; only available for
special design lifting columns)
Warning labels, Risk of crushing between the outer pro-
7
file and mains plug.
7
6.4.1 Overview of the operating elements / connections
S1 Toggle switch for traversing the RK Powerlift M
S2 Connection for a hand switch for traversing the Powerlift M, the following hand or foot switches can be con-
nected: RK Material Number QZB00D04AB041, QZB02C01AE114GS
X1 Device connector with integrated fuse for the input voltage of 100 V to 230 V
X2 Device socket, max. total current strength 5 A, voltage conforms with the input voltage
X3 Voltage switch for input voltage 115 V/230 V
Connecting electrical devices to the device socket leads to setting up an ME system and
can reduce the degree of safety. The manufacturer of the ME system is responsible for
maintaining the requirements applied to the ME system
6. Product information
1
2
3
4
5
1
6
39