General Power Tool Safety Warnings - Makita MU04 Manual De Instrucciones

Tijeras inalámbricas para hierba / cortasetos inalámbrico
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH (Original instructions)
SPECIFICATIONS
MU04 with shear blade for grass shear installed
Model:
Cutting width
Strokes per minute
Dimensions
(L x W x H)
Rated voltage
Standard battery cartridge
Net weight
HU06 with shear blade for hedge trimmer installed
Model:
Blade length
Strokes per minute
Dimensions
(L x W x H)
Rated voltage
Standard battery cartridge
Net weight
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
Specifications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your mains-oper-
ated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
347 mm x 177 mm x 131 mm (13-5/8" x 7" x 5-1/8")
D.C. 10.8 V - 12 V max
BL1016 / BL1021B / BL1041B
1.3 - 1.4 kg (2.8 - 3.2 lbs)
504 mm x 120 mm x 131 mm (19-7/8" x 4-3/4" x 5-1/8")
D.C. 10.8 V - 12 V max
BL1016 / BL1021B / BL1041B
1.3 - 1.5 kg (2.9 - 3.3 lbs)
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.
Personal Safety
1.
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
2.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection used
for appropriate conditions will reduce personal injuries.
2 ENGLISH
MU04
160 mm (6-5/16")
2,500/min
HU06
200 mm (7-7/8")
2,500/min

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hu06

Tabla de contenido