Installing Or Removing The Shear Blades For Hedge Trimmer - Makita MU04 Manual De Instrucciones

CAUTION:
Never use the tool without install-
ing the undercover.
10. Remove the blade cover, and then turn on the tool
to check that it works properly.
NOTICE:
If the shear blades do not operate prop-
erly, the blades are not engaging the crank prop-
erly. Remove the blades and install them again.
Installing or removing the shear
blades for hedge trimmer
CAUTION:
Attach the blade cover before
removing or installing the shear blades.
Removing the shear blades
1. Place the tool upside down.
2. While pressing the lock lever, turn the undercover
counterclockwise until
with on the lock lever.
3. Remove the undercover.
on the undercover is aligned
4. Loosen the two screws with a screwdriver and
remove the shear blades.
► 1 . Screws
NOTE: The shear blades can be removed without
removing the screws.
5. Remove the crank from the shear blades.
► 1 . Crank
NOTE: The crank may remain in the tool.
Attach the blade cover and the storage case to the
removed shear blades, and then store the blades.
11 ENGLISH
1
1