Installing Or Removing The Shear Blades For Grass Shear; Removing The Shear Blades; Installing The Shear Blades - Makita MU04 Manual De Instrucciones

NOTICE:
Do not attach the hinge of the grass
receiver to the tool forcibly after aligning the pro-
trusions on the grass receiver with the grooves
on the tool.
Installing or removing the shear
blades for grass shear

Removing the shear blades

1. Remove the grass receiver and place the tool
upside down.
2. While pressing the lock lever, turn the undercover
counterclockwise until
with on the lock lever.
3. Remove the undercover, shear blades, and crank.
on the undercover is aligned
► 1 . Undercover 2. Shear blades 3. Crank

Installing the shear blades

1.
Prepare the crank, undercover, and new shear
blades.
1
► 1 . Crank 2. Undercover 3. Shear blades
2. Remove the blade cover from the old shear
blades, and then attach it to the new ones.
3. Adjust the three pins so that they are lined up on
the alignment line.
9 ENGLISH
1
2
3
2 3