Installing Or Removing The Shear Blades For Grass Shear - Makita DUM604 Manual De Instrucciones

Installing or removing the blade cover
CAUTION:
Be careful not to touch the blades
when installing or removing the blade cover.
To remove the blade cover, pull it slightly, and then slide it side-
ways. To install the blade cover, perform the steps in reverse.
Installing or removing the grass receiver
CAUTION:
When installing or removing the
grass receiver, be sure to attach the blade cover
and be careful not to trap your fingers between
the tool and grass receiver.
Removing the grass receiver
1. Release the protrusions on the grass receiver
from the grooves on the tool while sliding the grass
receiver toward the front of the tool.
► 1 . Grass receiver
2. Release the hinge of the grass receiver from the
tool.
Installing the grass receiver
1. Hook the hinge of the grass receiver on the groove
of the tool.
► 1 . Hinge 2. Grass receiver
2.
Align the protrusions on the grass receiver with
the grooves on the tool by sliding the grass receiver
toward the front of the tool and moving it in the direction
of the arrow.
NOTICE:
receiver to the tool forcibly after aligning the pro-
trusions on the grass receiver with the grooves
on the tool.
Installing or removing the shear
blades for grass shear
NOTICE:
such as the crank are worn out, ask Makita
Authorized Service Centers for parts replacement
or repairs.
1
9 ENGLISH
Do not attach the hinge of the grass
If the parts other than the shear blades
1
2