Spare Parts; Control And Operation; Safety Instructions; Food Holder - Graef H 9 Manual De Instrucciones

Manual Universal Slicing Machine H 9 / H 91

Spare parts

The following spare parts can be
supplied for this unit:
Replacement blade 190 ø mm
●
● Replacement stainless steel car-
riage
● Replacement food holder
Contact customer service if you
need spare parts for your unit.

control and operation

This chapter provides you with im-
portant information on operating
the unit.

Safety instructions

cAutION
Follow the safety instructions
below to prevent hazards and
property damage:
Do not touch the blade with
►
your fingers. It is very sharp
and cause various injuries.
Slicing
Place the carriage on the car-
‹
riage guide profile.
Place the items to be sliced on
‹
the carriage.
Set the desired slicing thickness.
‹
Turn the handle away from your
‹
body and push the items to be
sliced to the front.
important!
► Soft items to be sliced (e.g.,
cheese or ham) can be sliced
best when cool.
► Soft items can be sliced better
when you turn faster and push
the items to be sliced forward
more slowly.
► To slice vegetables, it is suf-
ficient to turn slowly, partially
even only scraping while the
blade is stationary.
► When slicing cucumbers or car-
rots, it is advantageous if they
are cut to a uniform length
beforehand.

Food holder

As soon it is no longer possible to
correctly hold onto the items to
be sliced, the food holder must be
used.
Place the food rests or the small
‹
items for slicing on the carriage.
Set the food holder on the rear
‹
of the carriage and put the food
holder onto the items to be
sliced.
Proceed as above as described in
‹
"Slicing".
© Gebr. Graef GmbH & Co. KG / 03
EN
15