Publicidad
Idiomas disponibles
Idiomas disponibles
Symbols on the device
Warning of flying objects.
Keep other persons away from
the work area.
Wear suitable hearing protec-
tion and safety goggles when
operating the device.
Protect the device from rain
and spray water.
For users up to 177 cm tall.
For users taller than 178 cm.
For use under objects (e.g.
benches).
Direction of rotation for opening
the bristle strip locking cover.
Direction of rotation for closing
the bristle strip locking cover.
Description of the device
See graphics page for illustrations
Illustration A
Rotating nylon brush
1
Pivoting cleaning head
2
Pivoting cleaning head unlocking button
3
Telescoping handle
4
Second handle
5
Telescoping handle unlocking button
6
Trigger lockout button
7
Handle
8
Trigger
9
Mount for 18 V Battery Power battery
10
pack
Battery pack unlocking button
11
Type plate
12
Brush protective cover
13
Guide aid with bristle strip locking cover
14
14
1. Push the pipe provided with the cham-
fered side into the motor housing.
The pipe latches audibly into place.
ATTENTION
Risk of damage
The handle is pre-installed and set to the
shortest telescopic length. Do not change
the setting until the telescoping handle is
completely installed.
2. Insert the upper tube section into the
mount on the handle until it audibly
latches into place.
Illustration C
3. Fit the power cable into the cable duct in
the telescoping handle from the bottom
to the top.
Illustration D
4. Push the second handle into the mount
until it audibly latches into place.
Illustration E
5. Push the protective cover into the mount
until it audibly latches into place.
Illustration F
6. Screw open the handle lock of the bristle
strip holder in a clockwise direction and
remove it.
Illustration G
7. Join the bristle strip into a crown by
snapping the ball into the recess.
Illustration H
8. Place the bristle crown into the holder.
Illustration I
9. Put on the guide aid including the bristle
strip locking cover and screw closed in
an anti-clockwise direction.
Illustration J
Initial startup
Adjusting the device
Adjusting the telescoping handle
You can adjust the length of the device to
suit your requirements.
1. Press the unlocking button.
2. Adjust the telescoping handle as de-
sired.
Illustration K
English
Assembly
Publicidad
Capítulos
