Brewing Coffee With A Preset Time; Boiling Water - Beem 03597 Manual De Instrucciones

Ocultar thumbs Ver también para 03597:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

37

Brewing Coffee with a Preset Time

You have the option of setting a preset time so that the coffee is freshly prepared at the time
you want.
To make coffee with a preset time, the clock needs to be set (see the "Handling and
Operation" chapter – "Time").
1. Perform steps 1 – 8 from the "Making Coffee" section.
2. Turn the rotary knob (3) to the position Program. The hour display fl ashes.
3. Use the
4. Press the
5. Use the
6. Press the
7. Press the
constantly and the preset time is active.
Please Note: As long as the preset time is activated, you cannot make any further settings
or use other functions.
8. Press the
the preset time is no longer active.
The preset time remains stored until a new desired time is set. To reactivate the desired
time which is stored, turn the rotary knob to the Program position and wait until the
hours stop fl ashing. Then press the

Boiling Water

You can individually set the temperature to which the water is heated in the Water program.
You can choose a temperature of between 32 and 100 °C.
1. Fill the water tank (13) with water (see the "Preparation" chapter – "Filling the Water
Tank").
Please Note: The carafe has a useful volume of no more than 750 ml! It must not be
overfi lled!
2. Place the carafe (8) without the fi lter cone (12) in the main device (13) on the scale (10).
3. Turn the rotary knob (3) to the position Water. An indication of the temperature appears
on the display (2).
4. Use the
ture is shown on the display and is automatically active.
03597_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 37
03597_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 37
and
buttons (5) to set the hours.
button (4) to switch to the minutes display. The minutes display fl ashes.
and
buttons to set the minutes.
button to confi rm the set start time.
button again to activate the preset time. On the display (2), PROG is shown
button again to deactivate the preset time. The PROG display goes out and
and
buttons (5) to set the temperature you want. The selected tempera-
button to activate the preset time.
EN
18.12.2018 10:50:06
18.12.2018 10:50:06

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido