Step 1 - Adjust The Regulator - Haier HCR2250AGS Instrucciones De Instalación

STEP 1 - ADJUST THE REGULATOR

IMPORTANT: Disconnect all electrical power, at the main circuit breaker or fuse box.
Shut off the gas supply to the range by closing the manual shut-off valve.
1. Unscrew the regulator cap with the wrench.
a
a
Regulator Cap
2. Remove the retainer pin that is currently positioned for use with Natural Gas.
a
a
Retainer Pin
3. Turn the retainer pin upside down and replace it into the regulator cap. It is now
positioned for use with LP gas.
a
a
Retainer Pin
24